Wedge Anchor Golden Anchor M8x96mm Hot-Dip Galvanized C3 50pcs Essve

Description

The Essve Wedge Anchor Golden Anchor FZV M8/20/96 is a high-quality wedge anchor (stud anchor) developed for heavy-duty and demanding outdoor structural fastenings. Constructed from robust carbon steel (strength class min. 5.8) and featuring a hot-dip galvanized surface treatment with a C3 corrosivity class rating, it offers reliable and long-term rust protection in harsh environments. This wedge anchor is the perfect choice for fastening wooden beams, steel studs, facade framing, ironwork structures, or brackets into hard-cured concrete and natural stone.

Key Benefits of Essve Golden Anchor

• Highest Load Capacity Outdoors: Engineered for applications with high load requirements in outdoor environments.
• Stainless Steel Clip for Maximum Safety: The expansion mechanism is equipped with a stainless steel clip that guarantees a permanent and secure grip inside the drill hole.
• Strike Head Protects the Threads: The smart strike head at the top of the anchor prevents thread damage when hammering it in.
• Faster Installation Without Blow-Out: Saves time on the job site—no blow-out cleaning of the drill hole is required; a simple rough cleaning with the drill bit is sufficient.
• Environmental and Safety Approved: CE-marked via ETA-12/0257 and rated as "Accepted" (Accepteras) by Byggvarubedömningen (the Swedish Building Material Assessment).

Easy Installation in 4 Simple Steps

Installing the Essve Golden Anchor is both fast and safe because the drill diameter matches the bolt diameter exactly (8 mm).

• Position the fixture (e.g., the beam or bracket) into the correct place.
• Drill the hole directly through the fixture using an 8 mm concrete drill bit to a depth of at least 70 mm. Clear the hole roughly using the drill bit.
• Hammer the wedge anchor in using a hammer until it reaches the correct installation depth (66 mm).
• Tighten the flange nut with a 13 mm socket to the prescribed torque of 23 Nm. As the nut is tightened, the clip is forced up the tapered end and expands powerfully against the borehole wall. Done!

Specifications

• Dimension (M-thread): M8
• Length: 96 mm
• Max. Fixture Thickness (Clamping Range): 20 mm
• Surface Treatment / Corrosivity Class: Hot-dip galvanized (HDG) / C3
• Material Class: Carbon steel min. 5.8 (with stainless steel clip)
• Drill Diameter: 8 mm
• Min. Drilling Depth: 70 mm
• Setting Depth / Effective Setting Depth: 66 mm / 55 mm
• Tightening Torque: 23 Nm
• Socket Size: 13 mm
• Hole Diameter in Fixture: 9 mm
• Min. Concrete Thickness: 110 mm
• Min. Edge Distance / Spacing: 40 mm / 50 mm
• Approvals: CE, ETA-12/0257
• Environmental Assessment: Byggvarubedömningen (Total: Accepted)
• Quantity per Pack: 50 pcs