-
ALLPLUGG 10X36MM STYCK
Avsedd för infästning i betong, natursten, tegel, lättbetong, lättklinker samt hålstens- och skivmaterial. Pluggen expanderar olika mycket beroende på vilket material pluggen används i, hårt, poröst, hålstens- eller skivmaterial. I massiva material dras bara pluggen ihop, medan i hålstens- och skivmaterial så dras den ihop till en knut. Pluggen är försedd med vingar som hindrar den från att rotera vid iskruvning. Material: Polyetylen.
769
8 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
ALLPLUGG 8X32MM STYCK
Avsedd för infästning i betong, natursten, tegel, lättbetong, lättklinker samt hålstens- och skivmaterial. Pluggen expanderar olika mycket beroende på vilket material pluggen används i, hårt, poröst, hålstens- eller skivmaterial. I massiva material dras bara pluggen ihop, medan i hålstens- och skivmaterial så dras den ihop till en knut. Pluggen är försedd med vingar som hindrar den från att rotera vid iskruvning. Material: Polyetylen.
768
5 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
ALLPLUGG RAWL UNO 10X36MM 50ST
Avsedd för infästning i betong, natursten, tegel, lättbetong, lättklinker samt hålstens- och skivmaterial. Pluggen expanderar olika mycket beroende på vilket material pluggen används i, hårt, poröst, hålstens- eller skivmaterial. I massiva material dras bara pluggen ihop, medan i hålstens- och skivmaterial så dras den ihop till en knut. Pluggen är försedd med vingar som hindrar den från att rotera vid iskruvning. Material: Polyetylen.
003941924
73 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
Adapter Bit Holder 1/2T To Ground Screw M16 25mm Stavrex
This adapter attaches to impact screwdrivers with bit holder, combined with extension and 24mm socket.
200783476
17 kr / pc.21 kr / pc.Save 19 %Add to favorites- Stock status
- Lev. normalt inom ca 2 till 6 vardagar
-
Adjustment Tool Indu-Prog/Leveling Screw Essve
Uster tool HEX20 is used for adjusting Essve leveling screw, adjustment tool HEX20 can also be used for fine adjustment of screw-in length.
200162791
182 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 6 vardagar
-
Adjustment Washer Mix Box, Black, 140pcs, Harpun
Mixing box containing 140 adjusting washers, For setting large and heavy concrete elements, Ensures that the assembly slides smoothly.
004620726
655 kr / pc.862 kr / pc.Save 24 %Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Anchor Mass R-KER-II, 300mL, Fast 288196
Two-component, high-performance, styrene-free anchor compound, Intended for use in concrete and also approved for use in cracked concrete (option 1).
007294483
242 kr / pc.302 kr / pc.Save 20 %kampanjAdd to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
Anchor Screw Fibercut TX20 Corrseal C4 5x40mm 1200pcs Essve
Anchor screw is made of hardened steel and has a surface treatment of CorrSeal, C4, the screw has a TX-mount/bit.
200162899
686 kr / PakAdd to favorites- Stock status
- Lev. normalt inom ca 2 till 6 vardagar
-
Angle Black 2x50x50x35mm, Joma 4820004
Mainly used as a cross connection in wood. The fitting is intended for smaller loads.
700325283
30 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
Angle Bracket 105x105x90x2.5mm Fast 833167
ABY angles are mainly used for cross joints in wood, e.g. between rafters and hammer ties, when anchoring roof ridges to load-bearing beams as well as
006810663
29 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
Angle Bracket 164x80x4.0x60mm Fast 833171
Angle fitting ABO FAST CC Used as a cross connection in wood, Can also be advantageously used as a connection between sill and wall stud
006810667
63 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 1 till 5 vardagar
-
Angle Bracket 413 2x65x65x80mm Joma
Angle brackets 413 and 415 are used as cross connections in smaller wooden structures.
700175618
20 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 6 vardagar
-
Angle Bracket 7357, TS73, 225x65mm, Silver, Dorma
For upside-down mounting of door closers on the stop side with deep frames
004405133
666 kr / pc.862 kr / pc.Save 23 %Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABL, CC, 40x40x2x25mm, Hot-Dip Galvanized, 300pcs, Fast 833130
ABL angles are used for joining smaller wooden dimensions.
006810626
1 782 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABL, CC, 40x40x2x40mm, Hot-Dip Galvanized, 200pcs, Fast 833131
ABL angles are used for joining smaller wooden dimensions.
006810627
1 503 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABL, CC, 60x60x2x25mm, Hot-Dip Galvanized, 100pcs, Fast 833137
ABL angles are used for joining smaller wooden dimensions.
006810633
615 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABM, CC, 40x40x2.5x60mm, Hot-Dip Galvanized, 80pcs, Fast 833133
ABM angles are mainly used for cross-joining wood, for example between truss and hammer strap, when anchoring roof ridges to load-bearing beams.
006810629
672 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABM, CC, 60x60x2.5x40mm, Hot-Dip Galvanized, 80pcs, Fast 833138
ABM angles are mainly used for cross-joining wood, for example between truss and hammer strap, when anchoring roof ridges to load-bearing beams.
006810634
557 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABM, CC, 60x60x2.5x60mm, Hot-Dip Galvanized, 40pcs, Fast 833139
ABM angles are mainly used for cross-joining wood, for example between truss and hammer strap, when anchoring roof ridges to load-bearing beams.
006810635
407 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABM, CC, 80x80x2.5x60mm, Hot-Dip Galvanized, 35pcs, Fast 833148
ABM angles are mainly used for cross-joining wood, for example between truss and hammer strap, when anchoring roof ridges to load-bearing beams.
006810644
621 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABNOR, CC, 135x90x4x65mm, Galvanized, 10pcs, Fast 833182
ABNOR angles with edge rib reinforcement can withstand high upward loads but are also strong in other load directions.
006810673
894 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABNR, CC, 285X90X4,0X65mm, 8pcs, Fast 833183
ABNR angles with edge rib reinforcement can handle high upward loads but are also strong in other load directions.
006810674
1 048 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABQ, CC, 120x90x3x40mm, Hot-Dip Galvanized, 40pcs, Fast 833168
ABQ angles are used for minor or moderate loads, such as cross connection in wood or between wooden constructions and concrete.
006810664
786 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABS, CC, 65x65x2x80mm, Hot-Dip Galvanized, 45pcs, Fast 833460
ABQ angles are used for minor or moderate loads, such as cross connection in wood or between wooden constructions and concrete.
007181742
817 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Angle Bracket ABT, CC, 90x48x3x116mm, Hot-Dip Galvanized, 25pcs, Fast 833152
ABT angles are mainly used for bolting between wooden structures and concrete, lightweight concrete or brick.
006810648
809 kr / pc.Add to favorites- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
Search
My pages
Favorites
Favorites count:
Basket
Items count:
