Voltage Tester CAT IV 12-1000V AC Wiha

Description

Voltage and continuity tester 12–1000 V AC, CAT IV incl. 2 AAA batteries. Determine the freedom from voltage! The voltage and continuity tester from Wiha makes it easy for you to carry out the checks required to comply with this safety rule and helps you with several of the tasks you perform in your daily work. Enables voltage testing within a convenient measuring range from 12 to 1000 V AC or 1500 V DC. It also makes it possible to carry out continuity testing, optical rotation testing, single-pole testing and automatic polarity identification.

The LED display makes the measurement results easy to read. An additional acoustic signal signals the current flow during continuity testing. The integrated distance holder allows you to conveniently check electrical sockets with one hand. The integrated torch function also provides optimal lighting conditions, even in poorly lit work areas. By pressing the buttons on both handles of the test tips at the same time, you can perform a function test on a residual current device by connecting a load. In accordance with CAT III to 1,000 V and CAT IV to 600 V, the Wiha voltage and continuity tester provides maximum safety for work on building installations and directly on sources in low-voltage installations. Areas of application - To determine the absence of voltage. For standardized voltage testing, continuity testing and rotation testing, including tripping of residual current devices.

Specifications

• Battery: 2 x AAA batteries
• Voltage AC min–max: 12 - 1000 V
• Voltage DC min–max: 12 - 1500 V
• Pollution degree: 2
• Contactless voltage control: No
• ATEX approved: No
• Photovoltaic compatible: No
• EMobility compatible: No
• Integrated flashlight: Yes
• FI control: Yes
• Display: LED display
• Enclosure class: IP 64
• Rotation indication: LED L, R
• Continuity test: LED and acoustic tone
• Operating temperature: -15°C to +50°C
• Storage temperature: -20°C to +60°C
• Altitude above sea level: 2000m
• Single-pole phase control: 100 - 700 V AC
• Rotation testing: 170 - 1,000 V phase to phase AC 50/60 Hz
• Continuity test: Measuring range 0 - 500 kΩ + 50%
• LED ELV indication: > 50 VAC, > 120 V DC
• LCD range: X
• LCD resolution: X
• LCD accuracy: X
• LCD overflow indication: X
• Correct time: < 0.5 s at 100% of the nominal value
• Safety current: < 3.5 mA (at 1,000 V)
• Measuring operation: 30 s ON (operating time), 240 s OFF (recovery time)
• Battery consumption: approx. 80 mA
• Humidity: max. 85% RH
• Acoustic signal: Yes
• Dimensions: 240 x 75 x 30 mm
• Standards: IEC 61243-3:2014, IP64, CE CAT II 1,000V / CAT IV 600V