Programa Plus Frame Screw Unhardened 7x50mm Bright Zinc Plated C1 50pcs Essve

Description

Essve Programa Plus Frame Screw consists of an externally threaded zinc sleeve and a through steel screw that can rotate freely in the sleeve. When installed, the frame screw's sleeve sits in the frame and the screw in the wall. Programa Plus provides a fine entry hole thanks to four cutting grooves in the sleeve that cut the wood fibers when it enters the frame. The risk of cracks and chipping is therefore almost non-existent. By screwing on the sleeve, but not the screw, you can adjust the frame inwards or outwards. Programa Plus Frame Screw can be installed without fixed blocks and provides a completely adjustable and removable installation without damage to the frame or substrate. Installation with Programa Frame Screw improves and facilitates from an insulation point of view, as with mineral wool or joint foam you get an uninterrupted drive. Minimal risk of cracks. Strong sleeve with thick material. 61% stronger maximum torque before coating. 40% stronger pull-out force. Essve Programa Plus Frame Screw is BASTA registered. Essve Programa Plus Frame Screw is assessed in Sunda Hus with assessment B.

Essve Programa Plus Frame Screw is developed with Swedish window installers for the installation of windows, doors and glass sections in various materials. It is mainly suitable for wooden frames but also plastic and aluminum frames. Provides a fully adjustable installation.

• Installation in wooden joists: The distance between the frame and the wall determines the length of the frame screw to be used. Tip! Use KarmFix Programa as an installation aid in wooden wall constructions, so no wedges are needed.
• Installation on concrete, brick: The distance between the frame and the wall and the wall material determine the length of the frame screw. Length 70 and 90 mm together with N-plug. Consideration is taken to ensure that the correct screw-in length is obtained in the plug.
• Installation on hollow brick, lightweight concrete, lightweight clinker: Length 140 mm with NL or GXL plug. Consideration is taken to ensure that the correct screw-in length is obtained in the plug.

Specifications

• Surface treatment: Bright zinc-plated
• Corrosivity class: C1
• Diameter: 7mm
• Length: 50mm
• Head diameter: 16mm
• Drill diameter: 14mm
• Quantity/Pack: 50pcs