LED Downlight YMIR BAS 840 4" G2 2Poles 10W 230V 4000K IP20/IP54 White Exaktor
Efficient and well glare-free downlight, intended for recessed mounting in suspended ceilings, luminaire lumen 1000lm, Ra >80, SDCM 4.
Watch this product and we will notify you once it is back in stock.
LED Downlight YMIR BAS 840 4" G2 2Poles 10W 230V 4000K IP20/IP54 White Exaktor
Description
Efficient and well glare-free downlight, intended for recessed mounting in suspended ceilings. 10 watts. Luminaire lumen 1000 lm. Ra >80. SDCM 4. Lifespan L90B50, 50,000h Ta 25°C. IP20/passes IP40 from below. Luminaire housing in cast aluminum. Diffuse opal acrylic plastic diffuser. Diameter 132mm. Holes 108mm. Supplied with 2.5 m cable rack and LED light source color 840.
Technical Information
- Color temperature: 4000 - 4000K
- Nominal luminous flux: 0 lm
- Protection class (IP) front: IP54
- Suitable for VDU work (EN 12464-1): No
- Number of poles: 2
- Luminaire with limited surface temperature "D" (EN 60598-2-24): No
- Brushed surface: No
- No dimmer function: Yes
- Dimming 0-10 V: No
- Dimming 1-10 V: No
- Dimming trailing edge (phasecut-off): No
- Dimming depending on driver: No
- Dimming DALI: No
- Dimming DMX: No
- Dimming DSI: No
- Dimming leading edge (phasecut-on): No
- Dimming GPRS: No
- Dimming LineSwitch: No
- Dimming with touch: No
- Dimming with push button: No
- Dimming mains voltage modulation: No
- Dimming potentiometer (integrated): No
- Dimming programmable: No
- Dimming RF: No
- Dimming sine wave (Sine Wave Reduction): No
- Dimming manufacturer-specific: No
- Dimming Zigbee: No
- Driver: LED driver (constant current)
- Driver included: Yes
- Energy efficiency class built-in lamps: A++, A+, A (LED)
- Colour fastness (McAdam ellipse): SDCM3
- Colour rendering index (CRI/Ra): 80-89
- Glowing wire test (IEC 60695-2-11): None
- Adjustability: not adjustable
- Protection class (IP): IP20
- Protection class (IP) rear: IP20
- Lamp holder/socket: None
- Suitable for built-in/recessed mounting: Yes
- Suitable for clamp mounting: No
- Suitable for low-voltage systems: No
- Suitable for lamp power: 9 - 9 W
- Suitable for pillar/floor mounting: No
- Suitable for pendant suspension: No
- Suitable for track mounting: No
- Suitable for ceiling mounting: No
- Suitable for traverse mounting: No
- Suitable for surface mounting: No
- Suitable for wall mounting: No
- LED nominal current at constant current: 250 - 250 mA
- Luminous flux: 1000 - 1000 lm
- Light distribution: Symmetrical
- Light source: LED (not replaceable)
- Light distribution angle: 40-80° (wide beam)
- Luminous efficiency: 100 lm/W
- Luminous efficiency: 100 - 100 lm/W
- Light outlet: Direct
- Rated voltage: 230 - 230V
- Maximum number of luminaires per B16 circuit breaker: 34
- Maximum number of luminaires per C16 circuit breaker: 57
- Maximum system power: 10W
- With light source: Yes
- With light sensor: No
- With motion sensor: No
- Nominal service life L70/B50 at 25 °C: 50000 h
- Nominal lifetime L80/B50 at 25 °C: 100000 h
- Nominal ambient temperature according to IEC 62722-2-1: -20 - 30°C
- Nominal luminous flux (IEC 62722-2-1): 1000 - 1000 lm
- Insulation cover: No
- Reflector: None
- Protection class (IEC 61140): III
- Impact resistance (IK): IK00
- Voltage type: AC
- Type of wiring: Termination
- Replaceable driver: Yes
Specifications
- Light color: White
- Material housing/enclosure/frame: Aluminum
- Material dome/cover: Plastic (opal)
- Color housing/enclosure/frame: White
- Surface treatment: Powder coated
- Food Contact Material: No
- REACH: No
- ROHS: Yes
- Outer diameter: 132 mm
- Installation diameter: 108mm
- Installation diameter: 108 - 132 mm
- Installation height/depth: 59 mm

