Fan Heater BX9AE With 6 Elements 2 Speeds 9kW 400V IP44 Veab

Description

The fan heater is especially suitable for heating and drying garages, shops, warehouses, construction sites, workshops, caravan awnings and more. Can be mounted on the wall. The casing consists of red-painted hot-dip galvanized sheet metal. The elements are made of stainless steel. The heat is regulated by a capillary tube thermostat from 0°C to +35°C. The thermostat measures the temperature of the incoming air, which provides high accuracy. All models have a reset of the overheating protection on the cover. The fan motor is 400V and no neutral conductor is needed, the motor always runs correctly regardless of the phase sequence. Semko-approved, EMC-tested and CE-marked. IP44. 2-stage thermostat, power selector 0-4, 5-9 kW, on the same switch as the power selector you can also choose whether the fan motor should run continuously or stop when the thermostat switches off. Model BX9AE has 6 elements which gives an even phase load even at 4.5 kW and therefore leaves better space for other power consumption on the same fuse. The fan motor has two speeds and provides 800m3/h or 1300m3/h, at low speed the fan stops when the thermostat switches off the heat, at high speed it runs continuously. The fan heater has a 2 meter connection cord with a 16A plug (CEE connector).

Technical Information

• Power: 9kW
• Protection class (IP): IP44
• Number of power levels: 2
• Overheating protection: Yes
• Connection voltage: 400V
• Temperature adjustment: 0-35°C

Specifications

• Color: Red
• Width: 350mm
• Height: 450mm
• Depth: 370mm