Decking Screw Fibercut TX20 5x100mm Stainless Steel A4 100pcs Essve

Description

The screw is made of stainless steel A4, C5. It is equipped with a TX-holder/bit. The screw has a fiber cut in the tip, which provides a very low screw-in torque and minimizes cracking. The head is equipped with four cutting grooves that countersink the screw and leaves a smooth surface without cracks. In addition to use in decking structures, the screw length of 75 mm is also adapted for mounting roof tiles to battens. The screw's head design fits into the prepared holes of the concrete tiles, and the length ensures a strong and secure anchorage in the substrate. Essve deck screw classic is also available with CorrSeal surface treatment, in stainless steel A2, and in a banded version A4. Essve deck screw classic is registered in the BASTA system and meets the BASTA rating level, see BASTAonline.se for current registration status. Essve deck screw classic is assessed in Sunda Hus with assessment B. Essve deck screw classic meets the CE requirement according to EN14592.

Essve deck screw classic is intended for mounting decking timber etc. against wooden joists, outdoors in highly exposed environments, such as marine, pool areas and structures below ground level. For exposed environments or structures with a lot of movement, such as marine environments, pool areas, fences, railings etc. and when mounting teak-like decking timber such as Cumaru, Kirai and Siberian larch, deck screws of stainless steel quality are always recommended. When mounting hardwood decking timber, pre-drilling is always recommended. Recommended speed: 400-1200/min.

Specifications

• Main material: Stainless steel A4
• Corrosivity class: C5 A4
• Environmental coding: Outdoor
• Diameter: 5mm
• Length: 100mm
• Head diameter: 8mm
• Thread length: 60mm
• Bits: TX20
• Quantity/Pack: 100pcs