Conventional Multisensor Fire Detector Smoke/Heat 9.5-28VDC IP2X White Kidde Commercial
Conventional multisensor fire detector white, supports drift compensation to enable good environmental adaptation, self-diagnostics.
Watch this product and we will notify you once it is back in stock.
Conventional Multisensor Fire Detector Smoke/Heat 9.5-28VDC IP2X White Kidde Commercial
Conventional multisensor fire detector white, supports drift compensation to enable good environmental adaptation, self-diagnostics.
Description
Conventional multisensor fire detector white. Supports drift compensation to enable good environmental adaptation. Self-diagnostics. Local test activation with reed switch. Control of contamination in the detector chamber. LED visibility all around (360° viewing angle) eliminates the need to adjust the detector orientation.
Specifications
- Status Indication: Red LED
- User Interface: Via LED – polling, fault, contamination and alarm
- Compatibility: GST100A Series conventional CIEs as well as GST I-9319 Zone Monitor
- Reset Voltage: <1 VDC
- Reset Time: <10 s
- Alarm Levels: 2
- Connection: Zone connection – 2-core (polarity sensitive), RI connection – 2-core (polarity sensitive)
- Operating Voltage: 9.5 to 28 VDC (24 VDC typical)
- Current Consumption:
- <60 μA (Quiescent)
- ≤55 mA (Alarm)
- Cable Specification: >1.0 mm²
- Number of Cable Cores: 2
- Number of Cable Cores: 4
- Detection Principle: Optical & Heat
- Sensitivity: Programmable
- Zone Length: Panel dependent
- Remote Alarm Output: 1
- Physical Dimensions (Including base x Diameter): 54.5 mm x 100 mm
- Color: White (RAL 9016)
- Mounting type: Ceiling mount
- Material (body): ABS
- Vandalproof: No
- Operating temperature: -10 to +50°C
- Relative humidity: 0 to 95% noncondensing
- Environment: Indoor
- IP rating: IP2X
- Compliance: CE, WEEE
- Certification: EN54-5, EN54-7
- Voluntary marks: BOSEC
- Standards: LPCB
- ROHS: Yes
- REACH: No
- Food contact material: No

